Want to make welding fume solutions simply and efficiently? Then you must know these three methods!

As we all know, there will always be fume and dust in the welding process. Inhalation of this fume and dust will cause dizziness, cough, chest tightness, shortness of breath and other problems, and severe cases even suffer from pneumoconiosis! And the adhesion of these fume and dust on the production and processing equipment will shorten its use time and affect the production efficiency, so it is urgent to control the welding fume!

However, many manufacturers do not know how to effectively manage these welding fume, follow the trend to choose some unsuitable equipments, spend a lot of money and time, but the effect is not satisfactory. In view of these situations, today we will share with you 3 general solutions for efficient filtration of welding fume and dust. There must be one solution suitable for you!

Point-to-point collection and filtration

The so-called point-to-point collection is to use the suction arm to collect and filter the fume directly at the welding point. The most suitable equipment for point-to-point collection is the mobile fume extractor, which is generally small in size and does not take up too much space; using a flexible suction arm, it can hover at any position in the space and rotate 360 degrees freely to reach any fume emission point; equipped with various suction hoods, which can effectively improve the ability to collect welding fume. The filtration efficiency is high, and it is suitable for fume filtration in many fixed-point welding and small workpiece welding conditions.

Local collection and filtration

The solutions for local collection and filtration can be divided into these two types:

1. Use a self-circulating fume extraction tower to collect a certain part of the welding points. These types of equipment are usually larger than the mobile ones, but the winds will also increase accordingly. The most important thing is that the self-circulating fume extraction tower does not need to lay pipes, which is very friendly to the working conditions where many people are welding at the same time and need to be transported by cranes frequently. It is easy to install and can be used immediately when plugged in.

2. Generally, this solution is used more for robot welding fume filtration, that is, a fume extraction hood or fume extraction table is installed on the top, side and bottom of the fixed welding operation point, and the fume and dust are sucked away on the points, and then aggregated into the host for centralized filtration.

Centralized collection and filtration

The centralized collection and filtration can provide efficient filtration treatment of welding fume in the welding points of the whole workshop, which is suitable for the working conditions of many welding stations and the welding position is not fixed. Generally, centralized fume filtration equipment is composed of pipeline network and filtration host. Therefore, before use and installation, professional personnel are required to conduct precise measurements in the workshop, so as to scientifically and effectively lay pipeline network and accurately collect the fume and dust of welding points in place, and finally filtered in the host.

The above are the three general solutions for efficient filtration of welding fume introduced by us. Friends who have questions can leave a message below to communicate! In short, if you want to solve the problem of welding fume pollution more efficiently, it is best to find a professional fume extraction manufacturer to deal with it. Look forward to your messages.