Is it difficult to remove dust in the welding workshop? We tell you: Choosing the right equipment then it is super easy!

With the rapid development of industrial production in our country, the problem of environmental pollution is becoming more and more serious. Environmental protection has become one of the most important hot topics, especially in the metal processing industry,because so many fume and dust generated during the production and processing, it it ranked at the top of the environmental pollution rankings. Is it difficult to control the common welding fume and dust in the metal processing industry? We tell you that choosing the right equipment, then it becomes super easy!

First of all, I will take you to understand what electric welding is and what serious environmental pollution problems it will bring:

Electric Welding is a welding operation that uses an electrode to melt metal parts at high temperatures through an electric arc where they need to be connected. As the basic processing technology of thermal processing of metal materials, it is widely used in the industry, but at the same time, many harmful gases, fume,dust etc. will also appear in the process of electric welding.

According to statistics, when welding is performed in a small space, the concentration of welding fume will be as high as 100mg/m³ or more, and in some improperly ventilated workplaces, the concentration of welding fume can be as high as 800mg/m³, which will seriously damage workers' health. So it is urgent to control the fume and dust in the welding workshop!

Is there any equipment that can efficiently remove dust? Of course there is! We recommend that mobile fume extractors should be used for welding of fixed points and small workpieces; Centralized fume extraction system should be used for conditions with many welding stations and fixed welding positions; large-sized special-shaped workpieces and multiple people welding at the same time; The self-circulating fume and dust extraction tower is selected for the working conditions that are often transported by cranes.

Mobile fume extractor

Mainly for the filtration of fume and dust generated by some small workpieces and fixed-point welding conditions. It uses a flexible suction arm, which can be hovered at any position in the space, and can easily and flexibly reach the dust-generating point in any direction in 360 degrees. In addition, it adopts imported film-coated filter material, which has high precision, high purification efficiency, low cost of consumables, no need to replace frequently, ECO-friendly; With high-performance fan and automatic pulse back blowing cleaning system, the equipment will last longer!

Centralized fume extraction system

The centralized fume and dust filtration system adopts a modular design, which can be used in combination with a suitable centrifugal fan, suction arm, filtration device, and electronic control system according to the site conditions. The length of its suction arm can be customized according to the size of the station and the position of the welding point. Each suction arm is equipped with a manual air valve to facilitate the adjustment of the air volume. Each station can also be switched on and off independently, saving energy and reducing consumption, and reducing electricity costs;

the control system adopts frequency conversion speed regulation and PLC+touch screen, which is convenient to operate; there is also a pulse back-blowing device to clean the filter cartridge to ensure that the fume collector has a constant suction air volume and prolong the service time of the filter cartridge.

Self-circulating fume and dust extraction tower

One of the biggest features of this equipment is that there is no need to lay pipes. It can be used immediately after being connected to electricity. It does not occupy too much space in the workshop, nor does it affect the normal production. It is extremely convenient to use, and the later maintenance is also very simple and easy to operate. It has super strong fans and imported filter cartridges. The coverage area of each device is about 200-250 square meters, and the air supply distance from the air outlet is 8-9m. It can efficiently filter and control welding fume and dust, and the noise during operation is very small. It will not affect the daily work of employees. The built-in pulse back blowing cleaning system can greatly extend the usable time of the equipment; visual operation, frequency conversion control, and multi-speed adjustment can meet most of the welding fume control needs of the workshop.

The above are the three equipments that are more suitable for efficient dust removal of electric welding workshops. Friends who want to know more about them can leave a message below and send us a private message! We, Power Space, will design the most suitable solution according to the working conditions of your workshop to help you solve the fume and dust problem easily!