Pay attention to these eight points in the maintenance of the welding fume extractor

In recent years, with the implementation of the environmental impact assessment measures, many factories have been equipped with welding fume extractors, which has effectively improved the workshop environment and greatly improved the production efficiency of workers. However, with a longer time or increased production capacity, a series of problems began to appear in the welding fume extraction equipment in the workshop:

"Suction ability is becoming more and more less effective;

Once the machine is operated, the noise is extremely loud;

The machine is in full gear. The workshop is still full of fume. Is the machine broken?

In this case, we, Power Space Environmental Protection, would like to say that it is important to choose a reliable welding fume extractor, but whether the welding fume extractor can play the largest role, and the maintenance and repair are also important! If daily maintenance is not in place, no matter how good the welding fume extraction equipment is, it will still not achieve satisfactory results!

How to properly maintain the welding fume extractor? we all arranged as following. They are all practical methods, and it is better for you to collect them!

1. The user and maintenance personnel of the welding fume extractor should have a basic understanding of the equipment and know how to operate the equipment correctly.

2. For some special fume and dust treatment, the operator shall adjust the maintenance cycle and mode of the welding fume extractor by himself.

3. The filter cartridge of the welding fume extractor plays an important role. Now many workshops will choose pulse back blowing device, which can automatically clean the filter cartridge and prolong the service time of the filter cartridge. However, it still needs to be replaced regularly according to the on-site fume concentration and the service time of the equipment, so as to maintain good performance.

4. When cleaning the filter element, pay attention not to over treat the filter material surface and filter element gasket, which will affect the filtering accuracy and sealing performance of the equipment.

5. The welding fume extractor should be placed on a firm and flat ground to avoid noise caused by equipment shaking.

6. When using the equipment, pay attention to whether the voltage of the power supply is consistent with the machine. It is prohibited to use a socket with other appliances.

7. When moving the welding fume extractor, be careful not to tilt the machine more than 45 degrees.

8. The connection between the suction hose and the equipment shall be properly sealed; and prevent the hose from being collided or crimped by external forces, otherwise the air flow may be affected.

The above are the 8 points that should be paid attention to in the daily maintenance of the welding fume extractor summarized by us, and welcome your supplementary opinion! In a word, it is very important to choose a good welding fume extractor, but the later maintenance should not be ignored! Proper maintenance can not only maximize the fume collection & filtration effect, but also effectively prolong the service life.